Radium Engineering Fuel Pressure Gauge with 90 Degree Adapter, 0-100 PSI - 20-0407

Radium Engineering 20-0407 fuel pressure gauge with 90 degree adapter. Suitable for all fueling applications.

• Reads 0 to 100 psi (0 to 6.9 bar) with +/- 2% accuracy
• Acrylic lens with silicone-filled dial to dampen needle vibration for easier readings
• Stainless steel case, 1-5/8 in OD (1-3/4 in OD bezel), black bezel and housing
• Nickel-plated male 1/8 in NPT fitting
• The silicone fluid bubble inside the gauge is normal
• Over-pressurizing the gauge can permanently misalign the needle calibration
• Use PTFE-based thread sealant paste or tape on the 1/8 in NPT threads. Tighten by hand, then 1.5 to 3 turns past hand tight with a wrench. Do not tighten by gripping the gauge body

Included

• 0-100 psi fuel pressure gauge
• 90 degree 1/8 in NPT male to 1/8 in NPT female fitting

Fitment

• Universal. Suitable for all fueling applications. (Source: Radium Engineering)

Resources

• Radium Engineering product page

Contact us if you are unsure of fitment or Size HERE